CommuniGate Pro
Version 5.2
Services
 
 
HTTP

HTTP Modules

The CommuniGate Pro HTTP Admin and User modules implement the Hypertext Transfer Protocol via TCP/IP networks.

The HTTP Admin module:

The HTTP User module:

The CommuniGate Pro HTTP modules support various authentication methods, including the GSSAPI, Kerberos, and Certificate methods implementing the single sign-on functionality.

WebAdmin Server Interface

The Server Administrator can use any Web browser application to configure and to monitor the Server remotely, using the Web (HTML) forms.

The authentication schemes supported with the HTTP protocol protect the WebAdmin pages from an unauthorized access. In order to access the WebAdmin pages, the user should provide the name and the password of a CommuniGate Pro Account with required Server Access Rights.

By default, the HTTP Admin module accepts clear text TCP/IP WebAdmin connections on the port 8010 and secure (SSL/TLS) connections on the TCP port 9010.

To access the WebAdmin pages, the Server administrator should use the following URLs:
http://domain.com:8010

https://domain.com:9010
where domain.com is the name of the main server domain or its alias, or the IP address of the CommuniGate Pro Server.

Server configuration errors can cut you off the WebAdmin Server Interface, if all your Server IP addresses and DNS names are assigned to secondary Domains.

To access the WebAdmin Server Interface, use the following URLs:
http://sub.domain.com:8010/MainAdmin/
https://sub.domain.com:9010/MainAdmin/
where sub.domain.com is any name pointing to your Server computer or any of the Server IP addresses.

WebAdmin Domain Interface

If the CommuniGate Pro Server supports several Secondary Domains, the same port can be used by the Domain Administrators to access the Secondary Domains settings and account lists.

A domain administrator should access the server using the following URL:
http://sub.domain.com:8010
https://sub.domain.com:9010
where sub.domain.com is the name of the secondary domain to administer.

The server will ask for a user (Account) name and a password, and if the specified Account has the Domain Administrator access right, the list of the Domain Accounts is displayed.

Sometimes this URL cannot be used. For example, a secondary Domain may have no DNS A-records (only MX records). To access such a Domain, its Domain Administrator should use the following URL:

http://domain.com:8010/Admin/sub.domain.com/
where:
domain.com is the name of the Main Server Domain or its alias, or the IP address of the CommuniGate Pro Server.
sub.domain.com is the name of the Domain to access.

Other Domains can specify your Domain as their Administrator Domain. The Domain Settings page of your Domains provides a list of those Domains:

Administrated Domains
node100.example.com settings
test-dom.example.com settings

You can open their WebAdmin Domain Interfaces using the links on this page. Remember that you should login using your full Account name (yourAccountName@yourDomainName) when accessing other Domain WebAdmin pages.


Access to the WebUser Interface

CommuniGate Pro users can connect to the CommuniGate Pro Server with any Web browser (via the HTTP protocol) to manage their Accounts, to browse their Mailboxes, to read, copy, delete, forward, and redirect messages, to move messages between Mailboxes, to compose and submit new messages, etc.
This CommuniGate Pro component is called the
WebUser Interface.

Registered users and guests can also use this component to browse Mailing List archives.

By default, the HTTP User module accepts clear text TCP/IP connections on the TCP port 8100, and the secure connections - on the TCP port 9100. If your Server does not have to coexist with some other Web Server on the same computer, it is recommended to change these port numbers to 80 and 443 - the standard HTTP and HTTPS port numbers.
In this case your users will not have to specify the port number in their browsers.


Access to Account File Storage

CommuniGatePro users can user their Account File Storage as personal Web sites. See the File Storage section for the details.

The URL for the accountName@domainName File Storage (or personal Web site) is:
http://domainName:port/~accountName
https://domainName:port/~accountName
where port is the HTTP User ports (8100 and 9100 by default).

The list of files in that File Storage can be seen at:

http://domainName:port/~accountName/index.wssp
https://domainName:port/~accountName/index.wssp
This page is available to the Account owner only, and it can be used to manage the File Storage.

You can specify an alternative File Storage prefix using the Domain Settings. That setting can be an empty string, in this case personal Web sites can be accessed using the following URLs:

http://domainName:port/accountName/
https://domainName:port/accountName/

You can also use the CommuniGate Pro Router to access personal Web sites with domain-level URLs. See the Routing section below.


Configuring the HTTP modules

Use the WebAdmin Interface to configure the HTTP modules. Open the Services pages in the Settings realm, then open the HTTPA (Admin) and/or HTTPU (User) page.

Processing
Log Level: Channels: Listener
Request Size Limit: Scan Large Requests
  Support 'Keep-Alive'

HTTP Options
Advertise 'Basic' Authentication Advertise 'Digest' Authentication
Advertise 'NTLM' Authentication Advertise 'Negotiate' Authentication

Log Level
Use this setting to specify what kind of information the HTTP module should put in the Server Log. Usually you should use the Major or Problems (non-fatal errors) levels. But when you experience problems with the HTTP module, you may want to set the Log Level setting to Low-Level or All Info: in this case protocol-level or link-level details will be recorded in the System Log as well.
The HTTP Admin module records in the System Log are marked with the HTTPA tag.
The HTTP User module records in the System Log are marked with the HTTPU tag.
Channels
This setting is used to limit the number of simultaneous TCP/IP connections the HTTP module can accept. Most browsers open several connections to load an HTML page and all embedded pictures, so do not set this limit to less than 5, otherwise some browsers may fail to download embedded graphic objects.
listener
Follow this link to open the HTTP Admin Port or HTTP User Port listener settings. There you can specify the TCP port number(s) the service should use, the interfaces to use, and other options.

If the CommuniGate Pro Server computer runs some other Web Server application, you should specify a port number in the "secondary range" to avoid conflicts with that other Web Server application. Usually the "secondary" Web Servers use ports numbers in the 8000-8100 range. If you set the port number to 8010, you will be able to connect to your server by entering http://xxx.yyy.zzz:8010 in your Web browser, where xxx.yyy.zzz is the exact domain name (A-record) or the IP address of your server.

Request Size Limit
This setting limits the maximum size of an HTTP request the Server accepts. You may want to increase this limit if you want to allow your users to upload larger files and/or to attach larger files to messages composed using he WebUser Interface.
Support Keep-Alive
If this option is enabled, the CommuniGate Pro supports the Keep-Alive protocol feature, so a user browser can retrieve several files using the same HTTP connection. Some browsers do not implement this function correctly and they may have problems if this option is enabled.
Scan Large Requests
If this option is disabled, and the size of a HTTP request to be received exceeds the specified limit, the Server sends an error response and closes the connection. Many browsers do not display the error response in this case. Instead, they display a generic "connection is broken" message.
If this option is enabled, the Server sends an error response back and receives the entire request (but it does not store it anywhere). The user browser then displays the error message.
Advertise Basic AUTH, Advertise Digest AUTH,
Advertise NTLM AUTH, Advertise Negotiate AUTH
If these options are enabled, the Server will inform browsers that clear-text (Basic) or secure (Digest, NTLM, Negotiate/SNEGO) authentication methods are available. If you plan to connect to the WebAdmin Interface via clear-text (non-encrypted) links over the Internet, you may want to enable these options. Different browsers work differenly when these options are enabled. Some may fail, some may still use the clear-text (Basic) authentication method, so enable these options only if needed.
Note: the GSSAPI (Kerberos) authentication methods become available when the Negotiate AUTH method is enabled.

The HTTP modules set the MIME Content-Type for every object they send. To detect the proper Content-Type for plain files, the modules use the file name extension and the following "basic" built-in table:

File Extension  MIME type
htmltext/html
txttext/plain
gifimage/gif
jpgimage/jpeg
csstext/css
jstext/javascript

There is also an "extended" built-in table, which is displayed on the WebAdmin page.

You can create your own custom extension table by specifying additional file name extensions and corresponding MIME Content-Types:

MIME types
File ExtensionMIME type

doc application/msword
eml message/rfc822
flv video/x-flv
htm text/html
js text/javascript
jss text/javascript
mov video/quicktime
mp3 audio/mpeg
mpg video/mpeg
pdf application/pdf

The extended "built-in" table is displayed under the custom table.

When a file extension is converted into a MIME type, the custom table is checked first, then the built-in tables are checked. As a result, you can redefine the built-in table values with the custom table values

.

Routing

The HTTP modules use the Router to process all address it receives. But unlike other Access modules, the HTTP modules often deal not with complete E-mail addresses, but with domain names only.

When the HTTP Admin module receives a request, it uses the name or the IP address specified in the URL to decide which Domain Administration pages to display.

When the HTTP User module receives a request, it uses the name or the IP address specified in the URL to decide which Domain (its login page, Mailing Lists, File Storage, etc.) to access.

In order to support all types of CommuniGate Pro Routing features (Router Table, Domain Aliases, IP Address to Domain Mapping, etc.), the HTTP module composes a complete E-mail address LoginPage@domainname (where domainname is the domain name specified in the request URL), and then it processes this address with the Router:

Samples (Router Table records, domainA.com is a CommuniGate Pro Domain):

mail2.domain.com = domainA.com
When the http://mail2.domain.com/ URL is used, the <LoginPage@mail2.domain.com> address is routed to <LoginPage@domainA.com> address, and the domainA.com Web Interface is opened.
<LoginPage@mail2.domain.com> = user@domainA.com
When the http://mail2.domain.com/ URL is used, the <LoginPage@mail2.domain.com> address is routed to LOCAL account user@domainA.com, and the user@domainA.com File Storage is opened.
<LoginPage@mail2.domain.com> = subDir@user@domainA.com.domain
When the http://mail2.domain.com/ URL is used, the <LoginPage@mail2.domain.com> address is routed to the LOCAL account user@domainA.com with the subDir local address part, and the subDir directory of the user@domainA.com File Storage is opened.

Common Gateway Interface (CGI)

The HTTP User module can start CGI programs and scripts. To access a CGI program, the /cgi-bin/programName URL should be used, and the programName program should be placed into the CommuniGate Pro CGI Directory.

Use the WebAdmin Interface to open the HTTP User settings page:

CGI Applications
CGI Directory:
File ExtensionProgram to Start
HTTP Header Fields
CGI Directory
Enter the name of the server system file directory where your CGI programs are located. If that directory is inside the CommuniGate Pro base directory, then you can specify its relative name, otherwise specify the full path to that directory. The CGI Directory should not have any subdirectories.
File Extensions
While some operating systems (such as Unix) can start various interpreter-type programs/scripts by starting the proper interpreter, other operating systems require that the interpreter program is started explicitly. The CommuniGate Pro Server supports those operating systems by allowing you to specify the name of the interpreter program for certain file extensions. As a result, when the CommuniGate Pro Server needs to start a program or script with the specified extension, it forms the OS-level command line by prefixing the program/script name with the specified interpreter program name.
In the above example the Server will process the /cgi-bin/script.pl URL by executing the
Perl.exe script.pl
command.
HTTP Header Field
Use this table to specify custom, non-standard HTTP Request header fields that you want to pass to your CGI applications. If a request contains a header line with the specified field name, the line is passed to CGI applications as an environment variable with the HTTP_H_convertedFieldName name, where convertedFieldName is the field name in the uppercase letters, with all minus (-) symbols substituted with the underscore (_) symbols.

CGI programs can be used to extend functionality of the WebUser Interface. They can log into the Server via its PWD module to do some CLI/API operations and/or via the IMAP or XIMSS modules to access and modify mailbox data. To simplify these login operations, CGI programs can use the SessionID Authentication method.


Command Line Interface (CLI/API) Access

The HTTP User module provides access to the Server Command Line Interface/API via the /CLI/ realm.

Text Method

Send a GET or POST request with a command parameter. The parameter value should contain the CLI command to be executed.
If the request fails, the error code is returned as an HTTP response error string.
If the request is successful, the HTTP response code is 200.
If the request produced an output, the text representation of the resulting object is sent as the HTTP response body.

SOAP Method

Send a SOAP XML request. The request should have exactly one XML element - the CLI command to exectute.
The XML element tag is the CLI command tag.
the XML element sub-elements are XML representations of parameter objects and/or key elements. The key element text body is a CLI command key.

Example:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
  <SOAP-ENV:Body>
    <createAccount>
      <param>newuser@domain.dom</param>
      <key>TextMailbox</key>
      <param>
         <subKey key="RealName">John Doe</subKey>
        <subKey key="Password">soappass</subKey>
      </param>
    </createAccount>
  </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
This request is converted into:
createAccount "newuser@domain.dom" TextMailbox {RealName="John Doe"; Password="soappass";}

If the request produces an output, its XML representation is added to the SOAP response.

Example:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
  <SOAP-ENV:Body>
    <getAccount>
      <param>newuser@domain.dom</param>
    </getAccount>
  </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
This request is converted:
getAccount "newuser@domain.dom"
and a dictionary output is produced:
{Password="\001xxxxx"; RealName="John Doe";}
This response is sent with the SOAP response:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
  <SOAP-ENV:Body>
    <response>
      <object>
        <subKey key="Password">\001fjh{\024hdfu</subKey>
        <subKey key="RealName">SOAP Test</subKey>
      </object>
    </response>
  </SOAP-ENV:Body>
</SOAP-ENV:Envelope>

CommuniGate® Pro Guide. Copyright © 1998-2008, Stalker Software, Inc.